SM-SAO salt spray chamber uses: salt spray test machine known as salt spray corrosion test chamber, salt spray chamber, corrosion chamber, with a neutral salt spray test can also be used acetic acid salt spray test, mainly applicable to all kinds of material surface treatment, including paint, electroplating, organic and inorganic coating, anti-rust oil, chemical treatment corrosion tests of quality, thus achieving long products of corrosion resistance. Features: 1, the machine uses imported PVC board system, inner box with the use of advanced three-dimensional reinforcement ring technology, strong structure, solid, never deformation. 2, the test chamber for five heating surface heating method can really grasp the average temperature testing machine indoors. 3, the nozzle: The Bo Nute Theorem draw salt water spray, fog will make the diffusion rate doubled, and naturally fall on the specimen, the difference may be controlled by the amount of fog off ± 0.3ml / 80cm2H. 4, saturated air using air Henry's law, in order to heated humidification, and provided the necessary laboratory humidity. 5, the temperature directly affects the prerequisite for the corrosion rate, the Company adopted the way of PID temperature controllers, control error within ± 0.1 ℃. 6, only the use of the whole detection system, when a fault occurs, light-on display. 7, control instruments are in the same board, simple, and clear. 8, optional continuous or periodic spraying. 9, all the circuit breakers are equipped with all the heaters are electronic and mechanical devices with overheating protection. 10, multi-system protection, safety and reliability. 11, a new generation of digital display film button control panel, easy to operate, water fog. 12, automatic / manual water system with low water level automatic / manual supplement water feature, the test is not interrupted. 13, precision glass nozzle, using 4000 hours to ensure that no crystallization of obstruction. 14, with dual over-temperature protection, water shortage alert, ensure safe use. Technical parameters: Model: SAO-60 SAO-90 SAO-120 SAO-160 experiment size cm: A: 60x40x45; B: 90x50x60; C: 120x50x80; D: 160x50x100; equipment Material: imported PVC sheet & P.P test chamber temperature: saline test method 35 ± 1 ℃; corrosion test method 50 ± 1 ℃ saturated air barrel temperature: saline test method 47 ± 1 ℃; corrosion test method 63 ± 1 ℃ brine temperature: 35 ℃ ± 1 ℃ Time Memory: 0 ~ 999.9 hours, power and memory type, spray containing buzzer: continuous spray nozzle 4000 hours no crystallization of obstruction, special glass spray volume: 1.0 ~ 2.0 PH value: saline test method 6.5 to 7.2; 3.0 to corrosion test method 3.2 Test chamber volume: 108L; 270L; 480L; 800L Power: AC220V ± 10% 1PH 50 / 60Hz